2025 Weldcraft 20′

Check out this new model from Weldcraft. It is the ultimate multi-species boat that you can fish on the inland lakes as well as bigger water. You can set her up with an optional bow trolling motor or transom kicker motor. She has nice 26″ interior sides for safety and a raise bow area for casting. The helm leaning post offers the ability to sit foreword or aft for trolling. There are two standard swiveling bow seats with storage boxes underneath, an option for two more aft and an optional removable bow pedestal seat. She has a nice aerated livewell, storage forward, a in floor rod locker, two side rod lockers and generous storage in the console. Her windshield also folds down to get her into your garage.

Weldcraft hull designs are a carefully engineered balance of performance, speed, stability, handling, fuel economy and comfort. They are specialized to provide optimal performance in varying water conditions. Understanding how a hull’s shape is constructed is a critical factor in selecting the boat that will best fit your needs. A key factor to understand is “deadrise.” Deadrise is a measurement of the degree of angle between two surfaces. A boat’s deadrise is the amount of angle that forms between the boat bottom and a horizontal plane on either side of center keel. The deadrise angle is the least (meaning flattest) at the transom and gradually increases (more vee) as the bottom goes forward and then increases at a greater rate at the bow.

Optional Equipment

Granite Finished Interior & Half-Side Paint

Gun Metal Grey PPG #942725

Bow Box w/ Aerated Livewell

Center Console Helm includes: hydraulic steering, Yamaha remote mechanical engine pre-rig w/ binnacle control, fold-down windshield, and locking storage

Driver Leaning Post

Bow Folding Seat, Pedestal, and Base

Washdown System

Automatic Bilge Pump w/ Float Switch

Zinc Anodes

Kicker Motor Fuel Quick Connect

In Floor Rod Storage (holds 5 rods)

Dual Group 27 Batteries w/ Switch and Battery Boots

Dual Bank Battery Charger

Hang, Rig, & Run

Yamaha Stainless Steel Propeller

Optional Trailer Information

The Custom Integrity trailer is included in the lot price.

Single 5,000 lb. capacity axle, Aluminum

Custom fit to each model

Full welded bunk construction

Hydraulic Disc brakes

Bearing protection hubs

Waterproof LED lighting

Waterproof heat shrink connections

Polished aluminum step pads

15” Radial tires

Aluminum wheels

Spare tire bracket

Spare tire

Additional Specifictions

Length Overall: 20′ 6″

Beam: 92″

Height of Sides: 34″

Bottom Width: 72″

Interior Freeboard Height: 26″

Approximate Dry Weight w/ Engine: 2,145 lbs.

Deadrise: Bow: 28 degrees, Forward: 23 degrees, Transom: 14 degrees

Weldcraft provides three critical points of measurement so you have a complete picture of how the hull is designed to perform in various conditions. Generally speaking, deadrise is an indicator of a boat’s capability to handle rough water, shallow water, overall performance and the softness of the ride. Look for unique “deadrise defined” measurements clearly listed for every model throughout our brochures and websites.

Fuel Capacity: 42 gallons

Max Capacities: 6 persons 1,900 lbs. motor, persons, & gear

Aluminum Thickness: Side: .125 in (5052-H32), Bottom: .190 in (5052-H34), Transom: .190 in (5052-H34)

Hull Features:

Fitted Splash well for Main Motor

Extruded Chine, toe rail, & keel

Full Reverse Chine Bottom

Standard Equipment List

Hull Features:

25″ shaft main motor transom w/ 25″ shaft kicker

Fitted splashwell for main motor

Extruded chine, toe rail, and keel strip

Full reverse chine bottom design

Bow Casting platform w/ bow box and gunwale storage trays

Bow storage (room for additional batteries)

Floor storage compartment

4 Side storage trays with gunwale rod racks – 2 per side

Welded double bow eye

2 – welded stern eyes

Transducer brackets

Pressure tested subfloor fuel cell – diurnal system compliant

Exterior Features

Choice of grey or charcoal interior granite paint

Side stripes & vinyl graphics

Stainless steel thru-hull fittings below waterline w/ seacock valves

Rigging Features

Removable navigation & anchor lights w/storage clips

Instrument panel package includes: fuel gauge, power point, 5 marine grade lighted switches, analog tachometer, and USB port

Stainless steel marine horn

Fuel/water separator

Bilge pump

Single group 27 battery w/ switch

Hang, Rig, Run main engine

Interior Features

Instrument panel box in port gunwale

2 – Folding fish seats w/ swivels on storage boxes

Composite flooring

Full fisherman’s interior

LED Courtesy lighting package

Locking side tray rod lockers port and starboard

Reel Tread Decking package throughout

Engine:

• Engine Make: Yamaha
• Engine Model: F150XB
• Engine Type: Outboard 4 Stroke
• Drive Type: Other
• Power HP: 150.00
• Power KW: 111.86
• Fuel Type: Gas/Petrol
• Engine Location: Middle